SOME ITEMS IN THIS PROJECT ARE NO LONGER AVAILABLE
Pocket Tile Board
Project Sheet: cd2566
UPC #: 420004014740
Materials
- Wood Tile Board w/ 9 tiles
-
Doodlebug: Here Comes Santa Claus collection
- Paper (Holiday Hearts, Holly Days, Ladybug Dot-Grid)
- Sticker sheet
- Cardstock (Black, Yellow)
- Washi Tape (Apple Green) - Little B
- Mod Podge
- E6000
- Foam Brush
- Paper Trimmer w/Scoring Blade
- Photos
Directions
- Remove the tiles from the board. We will be using four tiles for this project; you can save the other five for another project.
- Cut the "Holiday Hearts" paper to size and glue it to the board, using Mod Podge.
- To create a pocket, cut the "Holly Days" paper to 5" x 12" and score at 1/2" from each end along the 5" side. Fold both 1/2" flaps in but don't glue yet. This is the pocket front.
- Cut "Holly Days" paper to 4" x 1-1/2" and score at 1/2", 3/4", and 1" on the 1-1/2 side. Fold on score line creating a valley and peak. This will be the sides of the pocket.
- Attach one 1/2" flap from the sides (step 4) to one end of pocket front (step 3) making sure it is glued between the score line.
- Repeat Step 4-5 to create the same for other end of the pocket.
- Glue the top 1/2" flap of the pocket front down over the side piece flaps that was glued down.
- The bottom 1/2" flap of the pocket front should be wrapped over the entire side piece and secure it with a dab of Mod Podge.
- Mod Podge the pocket front bottom flap to the bottom of the board.
- Mod Podge the both side piece flaps to the board. With this, the pocket is complete.
- To create a belt, cut a 1" width strip from black cardstock and Mod Podge horizontally in the middle of the pocket.
- To create a buckle, cut yellow cardstock to 4-1/2" x 2-1/2". Cut a rectangle out of the center leaving 3/4" all around.
- Mod Podge the yellow buckle in the center of the black belt.
- Attach photos onto three tiles, For the two outside photos, use "Ladybug dot-grid" paper as a photo mat leaving the outside edge showing. For the photo used in the center, do not use a photo mat.
- Cut the Ladybug dot-grid paper to 4" x 4" and Mod Podge it to the fourth tile. Glue the center photo tile onto this ladybug tile in a diamond shape so that the corners of the bottom tile show.
- Glue all three tiles onto the board using E6000. See picture for reference.
- Decorate the board and tiles using the Sticker sheet from the collection.
- Use washi tape to cover the front frame. Cover the edges of the frame sides with 1/4" x 12" strips from the "Holly Days" paper.
- Create some folders using leftover scrap paper. These can be used to hold photos inside the pocket.
- Display.