SOME ITEMS IN THIS PROJECT ARE NO LONGER AVAILABLE

Happy Joyful Slat Plaque

Project Sheet: cd1763

Happy Joyful Slat Plaque

Happy Joyful Slat Plaque

Project Sheet: cd1763

Materials

• Slat Wall Plaque-NST/440
• Authentique: Treasure Paper (Enhancements, Cheery, Darling)
• Stencil Mask-Hazel & Ruby (Greetings Phrases)
• Chalk Paint-FolkArt (Sheepskin)
• Mod Podge-Gloss
• Paint Brush
• Paper Trimmer
• Sandpaper

Directions

1. Cut five pieces of the patterned paper to measure 11-3/4” x 2-1/4”. Adhere to each slat using Mod Podge. Let dry.
2. Cut four pieces from the patterned paper to measure 11-3/4” x 1-1/8”. Adhere to the outer edges of the plaque using Mod Podge. Let Dry.
3. Brush on a layer of the Mod Podge over the top of all the paper surfaces. Let dry.
4. Remove the stencil masks from the sheet and stick to the front of the plaque where desired, making sure that the edges of each piece are pressed to the surface.
5. Using a paint brush and the Sheepskin chalk paint, paint over the top of the stencil masks, on the top of the plaque only. Make sure that the paint cover age is heavier over the masks than on the edges of the plaque. Let dry.
6. Remove the stencil masks from the plaque, placing back on the plastic insert to be able to use again.
7. Lightly sand the surface of the plaque, especially over words and dust off.
8. Using a paint brush, brush on a layer of Mod Podge over the entire surface. Let dry.
9. Display.