SOME ITEMS IN THIS PROJECT ARE NO LONGER AVAILABLE

Families are Forever Frame

Project Sheet: cd2248
UPC #: 420004012104

Families are Forever Frame

Families are Forever Frame

Project Sheet: cd2248
UPC #: 420004012104

Materials

  • 12x12 Frame - KID/107
  • Chalk Paint (Adirondack White) - FolkArt
  • Simple Stories: Snow Patrol

                   (2)  Paper  ( Let it Snow)

                    6x12 Cardstock Sticker

  • Vinyl - Families are Forever - Vinyl Words
  • 4x4 Frame - WOD1257
  • 6" Antique Snowflake - Darice
  • Acetate Sheet
  • Foam Squares
  • Glossy Accents
  • Mod Podge
  • Snow
  • Craft Knife
  • Pencil
  • Paper Trimmer
  • Sandpaper
  • Paint Brush

Directions

  1. Remove backing and glass from frames. Paint the edges of both frames and inside the openings, using White Chalk Paint, let dry.
  2. Trim one sheet of "Let it Snow" paper to measure 11-3/4" square. With blue plaid facing up, adhere the piece of paper to the 12x12 frame, by applying a Mod Podge to the front of the frame.  Smooth out any air bubbles, a credit card works well for this. Once dry place frame face down and cut out opening using craft knife.
  3. Trace the small frame and its opening on the blue side of the other sheet of "Let it Snow" paper, cut out using craft knife. Adhere the paper piece, snowflakes face up, to the small frame, also using Mod Podge.
  4. Cut four strips from the remaining "Let it Snow" paper to measure 7/8" x 11-3/4".  With snowflake side up, adhere along the sides of the 12x12 frame, using Mod Podge,
  5. Sand all edges and inside openings of both frames. Dust off.
  6. Cut a piece of acetate to fit in the back opening of the small frame.  Adhere into the frame using Glossy Accents. Let dry.
  7.  Adhere the small frame on top the 12x12 frame over the opening, using Glossy Accents. Let dry.
  8. Cut apart the vinyl words and the "L" and "O" from Love,discarding the "O".  You will want to leave a bigger space between the "L"  and "V" for the heart sticker. Apply vinyl to the frame following instructions on packaging.
  9. Cut jute hanger from snowflake and  adhere to the small frame, using Glossy Accents. Let dry.
  10. Using foam squares, adhere a heart sticker in place of the letter "O" in love and a snowflake in the center of the wood snowflake.
  11. Place frame face down, sprinkle a little snow on top of the acetate.  Then place glass, photo and backing into the frame.
  12. Display.