SOME ITEMS IN THIS PROJECT ARE NO LONGER AVAILABLE

"B" Butterfly Frame

Project Sheet: cd1826

"B" Butterfly Frame

Project Sheet: cd1826

Materials

• Frame YOR/1892
• Adhesive Floral Fabric - SPC
• Butterflies-Darice
• White Satin Cord-Morex Ribbon
• 3 inch Letter-Unfinished
• Acrylic Paint-Ceramcoat/White
• Paint Brush
• E6000
• Paper Trimmer
• Scissors

Directions

1. Remove the hardware, backing, and glass from the frame. Set aside.
2. Paint the surface of the frame, and the letter using the white acrylic paint. Let dry.
3. Cut a piece of the adhesive backed fabric to measure 5-1/4” x 11-1/4”. Lay the frame face down on the back side of the adhesive fabric, using a pen to trace around the inside of the frame. Use a scissors to cut out this middle section. Apply to the front of the frame.
4. Adhere the painted letter to the front of the frame using E6000 adhesive. Let dry.
5. Adhere the butterflies to the frame using E6000 adhesive. Let dry.
6. Thread the white satin cord through the holes in the frame, tying a knot, to hang the frame.
7. Put glass, photo, backing, and hardware on the frame.
8. Display.